3D Printers
QIDI PLUS4
QIDI · $649
8.3
yeahpick Score
Based on 4 metrics
A 370°C nozzle and 65°C actively heated chamber make ABS, nylon and PPS-CF printing affordable and reliable.
View pickSponsored link — we may earn a commission
Pros & Cons
Pros
- ✓ 400W actively heated chamber holds 65°C, printing ABS, ASA, PC and carbon-fibre composites without warping.
- ✓ 370°C bimetal hotend with direct drive unlocks high-temp engineering filaments up to PPS-CF.
- ✓ Flat 6 mm aluminum bed with 81-point mesh probing gives excellent, repeatable first-layer adhesion.
Cons
- ✗ Speed is on par with current Klipper CoreXY printers rather than class-leading.
- ✗ Dimensional tolerance is good but not best-in-class, limited by pressure-advance tuning.
- ✗ Setup wizard stops early; users must manually trigger bed leveling before the first print.
Specifications
| Build Volume | 305 x 305 x 280 mm |
| Nozzle Temp | Up to 370°C (bimetal, direct drive) |
| Chamber Temp | Up to 65°C active (400W heater) |
| Max Speed | 600 mm/s, 20,000 mm/s² |
| Filaments | PLA, PETG, ABS, ASA, PC, PA, PPS-CF, TPU |
| Machine Size | 505 x 487 x 550 mm, ~27 kg |
BOTTOM LINE
The best value in its price band for engineers printing high-temperature materials, overkill if you only ever run PLA and PETG. — buy with confidence.